Aircraft Characteristics
1. High efficiency: Short machining cycle, reducing non-cutting time;
2. High precision: excellent static accuracy and machining accuracy;
3. High spatial efficiency: maximizing functionality within a compact footprint;
Technical Specifications
| Project | Unit | Specifications | |
| Operational capability | Maximum turning diameter on the bed body | mm | 520 |
| Maximum turning diameter on the pallet | mm | 160 | |
| Maximum turning diameter | mm | 420 | |
| Maximum drilling diameter | mm | 50 | |
| Maximum turning length | mm | 500 | |
| Maximum bar stock diameter | mm | 52 | |
| Maximum stroke | X-direction/Z-direction | mm | 210/500 |
| Spindle | Spindle speed range | r/min | 35-4500 |
| Spindle basic speed (rated) | r/min | 1500 | |
| Main motor power | KW | 7.5/11 | |
| Spindle head model | A2-6 | ||
| Spindle through-hole diameter | 66 | ||
| Spindle front axle dimensions | 106.375 | ||
| Spindle radial runout | 0.003 | ||
| Spindle center to ground height | 1020 | ||
| Hydraulic tailstock | Maximum stroke of the tailstock sleeve | 100 | |
| Tailstock sleeve diameter | 75 | ||
| Tailstock sleeve taper bore taper | Moshi | 5# | |
| Precision | Rapid feed rate X/Z | m/min | 24/24 |
| Bidirectional positioning accuracy | 0.008 | ||
| Unidirectional repeat positioning accuracy | 0.003 | ||
| Dota | Drive method | Hydraulic + Servo | |
| Number of tool positions | position | 12 workstations | |
| Single-station indexing time | seconds | 0.2 | |
| Outer round knife square dimensions | 25×25 | ||
| Number of boring tool holders | one | 2 | |
| Number of face milling tool holders | one | 2 | |
| Boring tool shank diameter | ø25 | ||
| Chuck/Rotary Hydraulic Cylinder | Hollow | inch | 8/852 |
| Hydraulic system | 1.5 kW spline pump three‑way hydraulic station, 35 L capacity, nominal pressure 2.5–5 MPa | ||
| Cooling system | 550W cooling water pump, cutting fluid tank capacity 600L | ||
| Lubrication system | 20W automatic lubrication pump, oil tank capacity 2L | ||
| Power supply | Three-phase, 380 V, 50 Hz frequency | ||
| Machine tool external dimensions (length × width × height) | 2300×1520×1700 | ||
| Machine tool weight | Approximately 3,000 kg | ||
*Please note that this parameter and the product’s appearance are subject to change without further notice. The final interpretation rights belong to Taizhou Yilong Technology Co., Ltd.
Key Words
YL-T5250 CNC machine tool series with slant bed, turret, and tailstock
Summary:
Contact Us
Classification:
We look forward to working with you, Jointly promote the development of China's machinery manufacturing and automation